Confirm the input with “OK”. You can carry out the settings online directly on the PBX or prepare all the settings in the offline mode and then load them onto the PBX. The IP phones have local dial plan capacity. Unlike a connection via the public telephone network, no call charges are incurred and users can be reached as internal subscribers. The IP terminals are registered and their configuration is then completed. Page The maximum duration of two hours for the Date, time tions expired temporary licence activation has expired. The system is then accessible with a direct connection via the IP address.

Uploader: Meztibei
Date Added: 27 November 2010
File Size: 31.46 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 2771
Price: Free* [*Free Regsitration Required]

From the Upload Manager select the IP terminals to be loaded with the new application software. Note Failure to observe information identified in this way can lead to equip- ment faults or malfunctions or affect the performance of the system. The PBX creates then a new file.

If none of this helps a phone syslog capture or an Ethereal network capture will ascitel us what happens after your phone attempts to register. The delay values of the voice packets should be kept as small as possible. Syslogs can be captured on all the 5i Series phones. The following licences are managed in the PBX: The signal no-load voltage is approx.


The current MIB version can be downloaded from https: To keep the databases at the same level, you need to exchange data between the databases. The Upload is completed once all the IP terminals have been loaded with the new software and restarted.

Aastra IntelliGate Operating instructions |

The user name and password for accessing the folder that stores the data file 3com default value. Start a hyperterminal session 2.

Next load the IP terminals with a new application software. Depending on the system one or more AIP ppo can be used. Password for accessing the shared directory For Blue’s configuration it is necessary to create a file named ‘FileDaAcquisire. The display elements are arranged so that they remain visible whatever the installation posi- tion.

Minimum size as defined by the “Buffer Size” setting. Upgrade your Software Video server software From time to time software upgrades are issued for the video servers. Page Notes — If another terminal is operated on the AD2 bus in addition to an Aastra or Aastraat least one terminal must be powered by a local power supply unit.

Both are standard text files.

Latest Ascotel Direct PPP Connection Driver download for Windows 7, 8, Vista, XP

PMS Energy management and monitoring software Installation and operation instructions version 1. You can also define several static routes for the same IP terminals. Both prioritisation methods can be used simultaneously. For information on event messages and signal destinations, see “Event message concept”, page This means the resources of the available bandwidth can be used more sparingly.


For this reason sufficient bandwidth has to be included in the calculations when designing the maximum number of voice channels. In this case the LAN switch module assumes the function of two wiring adapters and routes the AD2 interfaces together with the Ethernet interfaces to the same RJ45 sockets on the front panel.

Ascotel ISDN telecommunications system from ascom

The new software is available in the form of individual files on an external FTP server. Warning High leakage current. Configure the host as shown in the topology diagram above. Our specialists will be happy to assist you ascotep the basis of the completed check-list. However the quality of the audio data is somewhat poorer as a result of the compression.

The event messages are stored temporarily for 5 minutes and then sent together to the external signal destination. A system first start deletes all the configuration sscotel, which is reset to its initialization values.